onsemi NCV7381C FlexRay® Transceiver

onsemi NCV7381C FlexRay® Transceiver is a high-temperature single-channel transceiver compliant with FlexRay Electrical Physical Layer Specification Rev. 3.0.1. This interface IC offers excellent EMC and ESD performance. The NCV7381C transceiver is capable of communicating at speeds of up to 10Mbit/s. The device's mode control functionality is optimized for nodes permanently connected to a car battery. onsemi NCV7381C transceiver is compatible with 14V and 28V systems.

Features

Compliant with FlexRay Electrical Physical Layer Specification Rev. 3.0.1.
Up to 10Mbit/s communication with FlexRay transmitter and receiver in normal-power modes
60ns bit time support
FlexRay low-power mode receiver for remote wakeup detection
Excellent Electromagnetic Susceptibility (EMS) level over the full frequency range
Very Low Electromagnetic Emissions (EME)
Bus pins protected against >10kV system ESD pulses
AEC-Q100 qualified and PPAP capable

Safe behavior under missing supply or no supply conditions
Interface pins for a protocol controller and a host (TxD, RxD, TxEN, RxEN, STBN, BGE, EN, and ERRN)
INH output for control of external regulators
Local wakeup pin WAKE
TxEN timeout
BGE feedback