SRDA3.3-4BTG

Littelfuse
576-SRDA3.3-4BTG
SRDA3.3-4BTG

Mfr.:

Description:
ESD Protection Diodes / TVS Diodes 35A 8pF Lightning Protection

Datasheet:
ECAD Model:
Download the free Library Loader to convert this file for your ECAD Tool. Learn more about the ECAD Model.
More Information
Learn more about Littelfuse SRDA3.3-4BTG

Product Attribute Attribute Value Select Attribute
Littelfuse
Product Category: ESD Protection Diodes / TVS Diodes
RoHS:  
Unidirectional
4 Channel
3.3 V
SMD/SMT
17.7 V
3.5 V
SOIC-8
35 A
600 W
8 pF
30 kV
30 kV
- 40 C
+ 125 C
TVS Diodes
SRDA3.3
Reel
Cut Tape
MouseReel
Brand: Littelfuse
Factory Pack Quantity: 2500
Subcategory: ESD Protection Diodes / TVS Diodes
Tradename: SPA
Unit Weight: 352,196 mg
Products found:
To show similar products, select at least one checkbox
Select at least one checkbox above to show similar products in this category.
Attributes selected: 0

Datasheet

Compliance Codes
TARIC:
8541100000
CNHTS:
8541590000
CAHTS:
8541100090
USHTS:
8541100080
JPHTS:
854110090
KRHTS:
8541109000
MXHTS:
8541100199
BRHTS:
85411029
ECCN:
EAR99
Origin Classifications
Country of Origin:
Thailand
Assembly Country of Origin:
Not available
Country of Diffusion:
Not available
The country is subject to change at the time of shipment.

ESD Protection Solutions

Littelfuse provides a wide range of products that protect components from ESD threats. ESD threats are extremely fast, low-energy events that can wreak havoc on electronic equipment. Trends in reduced chip protection and harsher end-user environments are requiring the need for enhanced protection solutions. Littelfuse produces varistors, suppressors, indicators, and more so users can find the right protection to ensure the long-term reliable operation of applications.

Transient Voltage Suppressor (TVS) Diodes

Littelfuse TVS (Transient Voltage Suppression) Diodes are a broad range of circuit protection products designed to protect electronic circuits against transients and overvoltage threats such as EFT (electrically fast transients) and ESD (electro-static discharge). Lightning strikes, inductive load switching, and ESD cause electrical over-stresses associated with the transmission on data lines and electronic circuits. Offered in a variety of surface mount and through-hole circuit board mounting formats, the TVS Diode portfolio includes high peak pulse current and peak pulse power options up to 20kA and 30kW, respectively. Littelfuse TVS Diodes are chosen for the fast response time (low clamping voltage), lower capacitance, and low leakage current. TVS Diodes are available in both unidirectional (unipolar) or bidirectional (bipolar) diodes circuit configurations. 

SRDA3.3 TVS Diode Array

Littelfuse SRDA3.3 TVS Diode Array is designed to protect telecommunications data lines against ESD and high surge events. This device can safely absorb up to 35A of lightning-induced surge current (tp=8/20μs) without performance degradation and can withstand a minimum of ±30kV ESD per the IEC61000-4-2 international standard. With just 8pF of capacitance (typical) from each I/O to ground, this Littelfuse device helps to maintain signal integrity, preventing data loss during transmission. Typical applications for this Littelfuse TVS diode array include tertiary (IC side) protection for telecommunication interfaces such as T1/E1/T3/E3 data lines, HDSL/SDSL, RS-232/RS-485 interfaces, 10/100/1000 Ethernet interfaces, and video lines. This device is also suitable for security cameras, storage DVRs, network equipment, instrumentation, medical equipment applications.

Lightning Surge TVS SPA Diodes

Littelfuse Lightning Surge TVS SPA Diodes are designed to limit the amount of unwanted voltages to prevent damage by blocking the surges. Applications for Littelfuse Lightning Surge TVS SPA Diodes include lightning I/O, 10/100/1000 Ethernet, and 2500/5000/10000 Ethernet.

TVS Silicon Protection Arrays (SPA)

Littelfuse Silicon Protection Array (SPA®) TVS Diodes are designed to protect electronics from very fast and damaging voltage transients, such as lightning and electrostatic discharge (ESD). These diodes offer an ideal protection solution for I/O interfaces and digital and analog signal lines in computer and consumer portable electronics. Littelfuse TVS diodes offer a broader application use and improved impulse protection performance over conventional diodes.

In Stock: 5.076

Stock:
5.076 Can Dispatch Immediately
Factory Lead Time:
13 Weeks Estimated factory production time for quantities greater than shown.
Minimum: 1   Multiples: 1
Unit Price:
-,-- lei
Ext. Price:
-,-- lei
Est. Tariff:
Packaging:
Full Reel (Order in multiples of 2500)

Pricing (RON)

Qty. Unit Price
Ext. Price
Cut Tape / MouseReel™ †
5,89 lei 5,89 lei
3,87 lei 38,70 lei
3,32 lei 332,00 lei
2,68 lei 1.340,00 lei
2,47 lei 2.470,00 lei
Full Reel (Order in multiples of 2500)
2,19 lei 5.475,00 lei
† A MouseReel™ fee of 29,00 lei will be added and calculated in your basket. All MouseReel™ orders are non-cancellable and non-returnable. ↩

An unexpected error has occurred.


Have a question? Please visit the Help Centre.
For questions about a specific order, please login to your account.

If you encounter further problems, please contact us on 800-346-6873 or email help@mouser.com.