Analog Devices Inc. LTC389x Synchronous DC/DC Controllers

Analog Devices Inc. LTC389x Synchronous Controllers are high-performance step-down switching regulator DC/DC controllers. The LTC389x controllers, with the exception of the LTC3894 series, drive all N-channel synchronous power MOSFET stages. The MOSFET stage can operate from input voltages up to 150V. The high-voltage LTC3894 Controllers drive a P-channel power MOSFET switch. LTC389x's constant-frequency, current-mode architecture achieves up to an 850kHz phase-lockable frequency. Designers can program the gate drive voltage from 5V to 10V. This programming enables the use of standard-level or logic FETs for maximum efficiency. Using external resistors, designers can also program the output voltage from 0.8V to 60V. Pin-programming allows for a fixed 5V or 3.3V output voltage.

Analog Devices Inc. LTC389x controllers' integrated switch eliminates the requirement of an external bootstrap diode. The internal charge pump allows 100% duty cycle operation. The OPTI-LOOP® compensation optimizes the transient response over a wide range of output capacitance and ESR values. LTC389x controllers extend operating run time in battery-powered systems with its low 40μA no-load quiescent current.

Features

  • 4V to 140V (150V Abs max) VIN range
  • -60V to 60V output voltage range
  • 5V to 10V (OPTI-DRIVE) adjustable gate drive level
  • 40μA (shutdown = 10μA) operating IQ
  • 100% duty cycle operation
  • No external bootstrap diode required
  • Selectable gate drive UVLO thresholds
  • Onboard LDO or external NMOS LDO for DRVCC
  • EXTVCC LDO powers drivers from VOUT
  • Phase-lockable frequency (75kHz to 850kHz)
  • Programmable fixed frequency (50kHz to 900kHz)
  • Selectable continuous, pulse-skipping or low ripple Burst Mode® operation at light loads
  • Adjustable burst clamp and current limit
  • Adjustable or fixed (5V/3.3V) output voltage
  • Power good output voltage monitor
  • Programmable input overvoltage lockout
  • 38-lead TSSOP high voltage package

Applications

  • Automotive and industrial power systems
  • High voltage battery operated systems
  • Telecommunications power systems
  • Distributed power systems

LTC3890 Typical Application

Application Circuit Diagram - Analog Devices Inc. LTC389x Synchronous DC/DC Controllers

LTC3894 Typical Application

Application Circuit Diagram - Analog Devices Inc. LTC389x Synchronous DC/DC Controllers

LTC3895 Typical Application

Application Circuit Diagram - Analog Devices Inc. LTC389x Synchronous DC/DC Controllers

LTC3896 Typical Application

Application Circuit Diagram - Analog Devices Inc. LTC389x Synchronous DC/DC Controllers
Published: 2017-04-28 | Updated: 2022-03-11